View 1 — General Plan
Plan.txt
1.6 KB
Plan-view geometric line work — bridge footprint, support lines, approach slabs, wing walls, and abutment notches.
DownloadThis is a sample of the geometric output EBL produces. It is not a stamped engineering drawing and is not for construction. Client adds dimensions and obtains engineer-of-record approval. See Terms of Service.
Back to Services
Sample — not a real client project
Sample Deliverable
A representative sample of the three views in a Full Package — the file format and the scope header your team receives, built around the inputs below.
Inputs for this sample project
A few sample input values this representative project is built around. In a real project, these inputs come from the 3-step submission wizard.
| Total Length | 200 ft |
|---|---|
| Deck Width | 32 ft |
| Support Skew | 15° |
| Spans | 3 — 60 / 80 / 60 ft |
| Beam Spaces | 5 |
Download the sample views
View 2 — Deck Plan
Deck.txt
1.5 KB
Deck cross-section geometric line work — deck slab, beam layout, haunch, and cross slope on either side of centerline.
DownloadView 3 — Bridge Elevation
Elevation.txt
1.8 KB
Side-elevation geometric line work — abutments, piers, approach slabs, girders, and span geometry between supports.
DownloadHow to use these in AutoCAD or MicroStation
The sample files above are commented examples that show the format and the scope header; they do not draw geometry when run. Delivered project files do, following exactly these steps.
AutoCAD
In a blank drawing, type SCRIPT at the command line and select the downloaded .txt file. The geometry will draw on the layers defined in the script.
MicroStation
Open a blank DGN and use the Key-In browser to source the file (@filename.txt), or paste the command lines directly into the Key-In window.
After import, your team adds dimensions and runs engineer-of-record review before any construction use.
Ready to submit your real project?
Walk through the 3-step submission wizard and receive your views by the end of the next business day.